Table of Contents
Advertisement
Editor's Note
Page Format
Setting the Logging Conditions
Set the conditions for logging data.
Source settings
Assign the controller or data to be logged as the source.
FUN Mode-[LOGING]-[SOURCE]-[SourceA to J]
Setting
SELECT
Assigns a CH No. or data as the selected source.
When the Data Storage Unit is connected to the ZS-LDC, only the
CH selection is displayed. When the Data Storage Unit is connected
to the ZS-MDC, only the data selection is displayed.
CH
Assigns the CH No. of the ZS-LDC to be logged.
Range: None, 1CH onwards (largest gang-mounted CH)
DATA
Assigns the data of the ZS-MDC to be logged.
Range: TASK1 to TASK4, Input A to Input I
SAVE
Set this item to ON to save logged data. Set this item to OFF in the case of
sources that are used solely as logging triggers.
Range: OFF, ON (default value: OFF)
LABEL
Sets the label for the logging data.
• Call up the initial character of each character group using function keys 1 to
4. (Other signals are assigned to the latter half of each group.)
1: A to Z
2: a to z ,
3: KANA
4. Numbers, :, ;, <, =, >, ?, @
• Switch the characters in order using the UP or DOWN key.
• Move the digits by the LEFT or RIGHT key.
• To clear a character, select a space.
Supplementary Explanation
Helpful information regarding operation and reference
pages are introduced here using symbols.
*This page has been made purely for explanatory purposes and does not exist.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Section3
Setting the Logging Conditions
Description
ZS-DSU
3-15
User's Manual
Introduction
Editor's Note
Title of each section
Header
Overview
Cross-header
Overview of the
cross-header
Movement
through menus up
to setting items
Index label
Indicates the section
number and title.
Explanation of
options
ZS-DSU
User's Manual
9
Advertisement
Table of Contents
