Table of Contents
Advertisement
Setting Banks
The ZS-DSU Series can hold up to four sets of settings. These settings can be switched
externally when changing the device setup. A set of these settings is called a "bank".
Switching banks
Bank 1 is selected as the default. Banks 2 and 4 are also available.
Banks can be switched from an external device by communication commands. For details on command
formats, refer to the "Communication Command Reference" (provided separately).
FUN Mode-[BANK]-[CHANGE]
Setting
CHANGE
Clearing banks
"Clearing" initializes the settings of the currently selected bank.
FUN Mode-[BANK]-[CLEAR]
Settings in [SYSTEM] and settings displayed in the RUN mode are not initialized.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Selects the target bank.
Range: BANK1, BANK2, BANK3, BANK4 (default: BANK1)
Setting Banks
Description
Section3
ZS-DSU
3-31
User's Manual
Advertisement
Table of Contents
