Table of Contents
Advertisement
■ Installing on the DIN track
The following describes how to attach the 35mm wide DIN track by quick, easy opera-
tion.
●
Installation procedure
The following describes how to install the Data Storage Unit and controllers on the DIN.
1.
Hook the connector end of the device onto
the DIN track.
2.
Push the device down onto the DIN track until
the hook on the I/O cable side is locked.
Push down until you hear it snap into place.
Always hook the connector end of the device on the DIN track first.Hooking the I/O cable end on the
DIN track first may impair the mounting strength of the DIN track attachment.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Section2
Data Storage Unit
DIN track (sold sepa-
rately)
PFP-100N (1m)
PFP-50N (0.5m)
PFP-100N2 (1m)
End plate (sold separately)
PFP-M
Hook on connector
Hook on I/O cable
ZS-DSU
User's Manual
2-5
Advertisement
Table of Contents
