Table of Contents
Advertisement
Power Supply Features
A
C
B
D
Feature
A
Program Button
B
Power Switch
C
Up Arrow Button
D
Down Arrow Button
E
Power Receptacle
F
Display
G
Digital Control LED
H
Air Pressure Assembly
I
Vacuum Port
J
Foot Pedal Receptacle
K
Ground Jack
L
Power Inlet & Fuse
Safety Guidelines
The following are safety precautions that personnel must understand and follow when using or servicing this
product.
1.
POTENTIAL SHOCK HAZARD - Repair procedures on PACE products should be performed by qualified service
personnel. Line voltage parts may be exposed when the equipment is disassembled. Service personnel must avoid
contact with these parts when troubleshooting the product.
2.
Tips and Heaters are hot when the handpiece is powered on and will remain so for a period of time after power off.
DO NOT touch the heater or the tip. Severe burns may result.
3.
PACE Tip & Tool Stands are designed specifically for use with the associated handpiece and houses it in a manner
that protects the user from accidental burns.
4.
Always use PACE systems in a well-ventilated area. Fume extraction systems, such as those available from PACE,
are highly recommended to help protect personnel from solder flux fumes.
5.
Exercise proper precautions when using chemicals (e.g., solder paste or flux). Refer to the Material Safety Data
Sheet (MSDS) supplied with each chemical and adhere to all safety precautions recommended by the
manufacturer.
6.
WARNING - The handpiece must be placed into the stand when not in use.
7.
This equipment is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the equipment by a person responsible for their safety.
©2022 PACE Inc., Vass, North Carolina, All Rights Reserved
https://paceworldwide.com/
F
G
H
I
E
Description
For access to program menu, presets, and confirmation of settings.
On/off control of power supply.
Increase set temperature and scroll through program menu functions.
Decrease set temperature and scroll through program menu functions.
Front panel connection of handpiece.
Displays temperature setting and menu functions.
Indicates status of power supply.
Consists of knob for adjusting amount of air pressure available from the
built-in port.
Provides vacuum for solder extraction and component handling tools.
Connection point for optional foot pedal control.
For grounding system to static safe work area.
Connection for IEC power cord and fuse replacement/storage.
J
K
L
Page 2
Advertisement
Table of Contents
