Installation Procedures; Connecting The Power Cord; Connecting A Keyboard Or Mouse; Switching On The Power - Advantech UTC-318H User Manual

2.2 Installation Procedures

2.2.1 Connecting the Power Cord

UTC-318 can be powered by a DC electrical outlet. When handling power cords,
ensure to only hold the plug ends. Please refer to Figure 2.3 when connecting the
male plug of the power cord to the UTC-318 DC inlet.

2.2.2 Connecting a Keyboard or Mouse

Before powering on the device, connect a keyboard or mouse to the relevant port in
the I/O section.

2.2.3 Switching on the Power

The power button is located at the rear of the UTC-318, as shown in Figure 2.3.
Figure 2.3 Connecting the Power Cord to the DC Inlet
UTC-318 User Manual 10