2.1
Anti-Static Precautions
Warning! Failure to take appropriate ESD precautions during maintenance may
result in permanent damage to the PPC and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the PPC model. ESD is especially common in dry climates. Therefore,
when manually handling or accessing any of the PPC model's internal components,
anti-static precautions should be strictly adhered to.
Always wear an anti-static wristband when handling the PPC model; this can prevent
ESD from damaging the board or causing personal injury.
Note!
Reference Chapter 1.3 (Chassis Comparison) to determine the chassis
type, then refer to Chapters 2.3 and 2.4 (for PPC-6151C/6171C-RTAE
and PPC-6151C/6171C-RMAE, respectively) for the installation guide-
lines.
2.2
Installation Procedures
The procedures listed below must be followed to ensure correct installation.
Remove the reinforced bracket
Check and adjust the jumpers on the PPC-MB-8260AE motherboard
Check and adjust jumpers setting
Connect the daughter board and motherboard with a cable
Memory card installation
PPC-6151C/6171C User Manual
12
2.3.1
2.3.2
2.3.3
2.3.4
2.3.5
2.4.1
2.4.2
2.4.3
2.4.4
2.4.5
2.4.6
2.5.1
2.5.2
2.5.3
2.5.4
2.5.5
2.5.7
2.5.8