2.2
Installation Procedures
When installing system hardware, adhere to the following order:
1.
Install the memory card.
2.
Install SATA HDD or M.2 storage devices.
3.
Install peripheral devices.
4.
Mount the panel PC.
5.
Configure the system.
2.2.1
Memory Card Installation
1.
Remove the 8 screws shown in the circles, then remove the rear cover.
2.
Insert the memory card into the corresponding slot on the main board, then
place the thermal pad provided in the accessory box on top of the memory card
and CPU. Remember to remove the protective film before using the thermal
pad.
PPC-310/312/315/321W EHL User Manual
Figure 2.4 Retention Screws on the Rear Cover
Figure 2.5 Memory Card Installation
12