Preparation For Wall/Ceiling Mounting - Siemens SICHARGE 8EM4110 Series Operating Instructions Manual

4.4.2

Preparation for wall/ceiling mounting

To securely fasten the Dispenser to the intended mounting surface, you must prepare the
mounting surface.
Secure work area
Ensure a sufficiently large safety zone around the mounting surface. For example, use
warning signs and barriers.
Cable entry position
The following figure shows the position of the cable entry from below into the Dispenser
Generation 2 with the option to connect additional Dispensers (daisy chain).
①
②
③
④
Figure 4-13 Cable entry wall / ceiling installation Generation 2
You can find a table with the connection diagram for connecting to the charging station and
the outer cable diameters in section Technical specifications (Page 102).
Dispenser
Operating Instructions, 07/2023, A5E52329862-AB
CAUTION
Cable glands for DC cable L+
Replacement screw gland
Cable glands for DC cable L-
Ethernet cable glands
4.4 Preparing the mounting surface
⑤ Protective conductor cable glands
⑥ Cable glands for global DC shutdown loop
⑦ AC cable glands
Application planning
53