Table of Contents
Advertisement
8.3.3.5
Charging screen
During an active charging process the HMI displays all the relevant information on the vehicle
status and the charging station status. The following is displayed on this screen:
• Charge status of the vehicle
• Output voltage at the charging point
• Output current at the charging point
• Output power at the charging point
• Total DC energy delivered to the vehicle
On this screen you can also stop the charging process by pressing the "Stop charging" button.
Figure 8-7 Charging screen
Dispenser
Operating Instructions, 07/2023, A5E52329862-AB
Operation
8.3 Operation via HMI
81
Advertisement
Table of Contents
