Properties Of The Mounting Surface - Siemens SICHARGE 8EM4110 Series Operating Instructions Manual

Application planning
4.2 Location planning
4.2.2

Properties of the mounting surface

• Floor mounting:
To ensure the stability of the Dispenser, the base must meet the following requirements:
– Level
– Dry
– Sufficiently solid and capable of bearing the load (e.g. concrete area in quality class
NOTE
Sealing the mounting plate
Seal the mounting plate and cable openings from the foundation with suitable materials.
The sealing is designed to protect against:
– Penetration of moisture
– Penetration of animals and insects
• Wall/ceiling mounting:
To ensure a secure hold of the Dispenser, the mounting surface must meet the following
requirements:
– Level
– Dry
– Sufficiently solid and stable
– Take static of building into account
You can find the dimensions for assembly in the section Preparing the mounting surface
(Page 50).
Additional data can be found in the section Technical specifications (Page 102).
40
C30/37)
Operating Instructions, 07/2023, A5E52329862-AB
Dispenser