Preparing The Mounting Surface; Preparation For Floor Mounting - Siemens SICHARGE 8EM4110 Series Operating Instructions Manual

Application planning

4.4 Preparing the mounting surface

4.4 Preparing the mounting surface
4.4.1

Preparation for floor mounting

To securely fasten the Dispenser to the intended mounting surface on the ground, you must
prepare the mounting surface.
Secure work area
Ensure a sufficiently large safety zone around the mounting surface. For example, use
warning signs and barriers.
Position of cable entry from below
The following figure shows the position of the cable entry through the supporting foot from
below into the Dispenser.
①
②
Figure 4-10 Cable entry
50
CAUTION
Front
Recess for cable entry
Operating Instructions, 07/2023, A5E52329862-AB
Dispenser