Table of Contents
Advertisement
Maintenance and service
10.1
Safety instructions
To guarantee the safety of persons and equipment during maintenance and service of the
Dispenser, observe the following safety instructions.
Electric shock from live parts
Electrical systems have live parts during operation. If the system has not been disconnected
from the power supply before maintenance work is performed inside the station, death,
serious injury or damage to property may occur.
• Perform any service and maintenance work on the inside only on a de-energized
• Observe the five safety rules for electrical work (Page 17).
Electrical shock due to residual charges in capacitors
The capacitors begin to discharge after the power supply of the charging station has been
switched off. Live parts remain under dangerous electrical voltage for up to 10 minutes
during discharging. Touching the live parts can lead to death or serious injury.
• Wait 10 minutes after switching off the power supply.
• Ensure that the charging station is not live.
• Only then should you start work on the charging station.
NOTICE
Damage to property due to foreign objects inside the station
During maintenance work, foreign matter such as dirt, tools or loose components can
remain in the Dispenser. The Dispenser can be damaged.
• During maintenance work, make sure that no foreign objects are left in and on the
• Reattach loose components after maintenance work.
• Carefully remove any dirt.
Dispenser
Operating Instructions, 07/2023, A5E52329862-AB
WARNING
Dispenser.
WARNING
dispenser.
10
95
Advertisement
Table of Contents
