Saving A Card Number; Selecting A Card - Sony Ericsson T608 User Manual

by the phone lock code. Before making a calling card call, you
have to select and activate a card.
Note:
You cannot use the calling card service for data calls.

Saving a Card Number

1. From standby mode, press
scroll to Phone Book (
2. Highlight Advanced and press
3. Highlight Calling Cards and press
4. Enter your phone lock code and press
5. Highlight Card Setup and press
6. Highlight Add New and press
7. Enter the name of your calling card and press
(left softkey).
8. Enter the access number of the calling card server and press
OK
(left softkey).
9. Choose the dialing delay (the amount of time the phone
waits before sending the next set of numbers) and press
Select
10. Select the number to send first: the verification/PIN number
or the dialed number (the phone number you are trying to
call) and press
11. Following the prompts, enter the following (the order will
vary depending on what you select in Step 10):
The verification number/PIN and press
softkey).
The next dialing delay and press

Selecting a Card

After you have stored the information for one or more calling
cards, you can choose which card will be used as the default.
(left softkey).
Select
Section 2: Understanding Your PCS Phone
Menu
(right softkey), then
Select
) and press
Select
Select
Select
Select
(left softkey).
Select
2G: Using the Internal Phone Book
(left softkey).
(left softkey).
(left softkey).
OK
(left softkey).
(left softkey).
(left softkey).
OK
OK
(left
(left softkey).
85