Resetting Default Commands - Sony Ericsson T608 User Manual

Note:
You can press
time without losing the commands you have just trained.
8. If the function associated with the command group is
dependent on another command, you will be prompted to
train those commands too.
Training All Command Groups
To train all command groups:
1. From standby mode, press
scroll to Settings (
2. Highlight Other and press
3. Highlight Voice Control and press
4. Highlight Manage Cmds. and press
5. Highlight Train All and press
6. Follow the prompts to train each command.
Note:
You can exit group training at any time without losing the commands
you have just trained.

Resetting Default Commands

There are three ways to rest the voice commands in your
phone: reset a single command, reset an entire group of
commands, or reset all commands.
Resetting a Single Command
To reset a single command:
1. From standby mode, press
scroll to Settings (
2. Highlight Other and press
3. Highlight Voice Control and press
4. Highlight Manage Cmds. and press
5. Highlight the command group that contains the command
you want to reset and press
6. Highlight the command you want to reset and press
Cancel
(right softkey) to exit group training at any
) and press
Select
) and press
Select
Section 2: Understanding Your PCS Phone
2J: Using Your Phone's Voice Controls 125
Menu
(right softkey), then
Select
(left softkey).
(left softkey).
Select
.
Select
(left softkey).
Menu
(right softkey), then
Select
(left softkey).
(left softkey).
Select
Select
Select
(left softkey).
(left softkey).
(left softkey).
(left softkey).
.