Assigning Personal Ring Tones - Sony Ericsson T608 User Manual

Assigning Personal Ring Tones

You can assign a personalized ring tone that identifies any
contact in your Internal Phone Book. This ring tone will be
played when the contact calls you (if the number is identified
by caller ID).
Adding a Ring Tone
To add a personal ring tone to a contact:
1. From standby mode, press
scroll to Phone Book (
2. Highlight Add Personal Rings and press
softkey).
3. Highlight Add New and press
4. Highlight the contact name you want to use and press
Select
(left softkey).
5. Highlight the ring tone you want to assign and press
Select
(left softkey).
Changing a Ring Tone
To change the ring tone used for a contact:
1. From standby mode, press
scroll to Phone Book (
2. Highlight Add Personal Rings and press
(left softkey).
3. Highlight the contact name you want to change and press
Select
(left softkey).
4. Highlight one of the following options and press
(left softkey).
Edit to select a new ring tone (see Step 5 for information).
Delete to remove the ring tone from the contact (press
Yes
[left softkey] to confirm the removal).
5. Highlight the ring tone you want to assign and press
Select
(left softkey).
Menu
) and press
Select
Menu
) and press
Section 2: Understanding Your PCS Phone
2G: Using the Internal Phone Book
(right softkey), then
Select
(left softkey).
Select
(left
(left softkey).
(right softkey), then
Select
(left softkey).
Select
Select
76