Table of Contents
Advertisement
Your phone is compatible with select TTY devices. Please
check with the manufacturer of your TTY device to ensure that
it supports digital wireless transmission. Your phone and TTY
device will connect via a special cable that plugs into your
phone's headset jack. If this cable was not provided with your
TTY device, contact your TTY device manufacturer to purchase
the connector cable.
When establishing your PCS Service, please call PCS Customer
SM
Solutions
via the state Telecommunications Relay Service
(TRS) by first dialing
provide the state TRS with this number: 866-727-4889.
To turn TTY Mode on or off:
1. From standby mode, press
scroll to Settings (
2. Highlight Other and press
3. Highlight Handsfree and press
4. Highlight TTY and press
5. Highlight Turn On TTY or Turn Off TTY, and press
(left softkey).
Note:
In TTY Mode, your phone will display
Note:
If TTY mode is enabled, the audio quality of non-TTY devices
connected to the headset jack may be impaired.
IMPORTANT NOTICE: 911 Emergency Calling
Sprint recommends that TTY users make emergency calls by other means
including Telecommunications Relay Services (TRS), analog cellular, and
landline communications. Wireless TTY calls to 911 may be corrupted
when received by public safety answering points (PSAPs) rendering some
communications unintelligible. The problem encountered appears related
to TTY equipment or software used by PSAPs. This matter has been
brought to the attention of the FCC, and the wireless industry and PSAP
community are currently working to resolve this.
Menu
) and press
Select
Select
Select
Section 2: Understanding Your PCS Phone
2B: Controlling Your Phone's Settings
Call
(left softkey). Then
(right softkey), then
Select
(left softkey).
(left softkey).
(left softkey).
(left softkey).
TTY
in standby mode.
Select
41
Advertisement
Table of Contents
