Table of Contents
Advertisement
Installing the Battery
Your PCS Phone comes with a Lithium Polymer battery. Follow
these steps to install it:
1. Locate the two slots at the
bottom of the battery
chamber.
2. Locate the two tabs on the
bottom of the battery.
3. Orient the battery with the
label facing away from the
phone.
4. Insert the tabs into the slots
at the bottom of the battery
chamber.
5. Press on the top of the
battery until it clicks into
place.
6. Locate the grooves along
each side of the back of the
phone.
7. Place the back cover so that
it rests against the phone at
the midpoint of the grooves.
8. Slide the back cover upward
until it clicks into place.
5
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone: The Basics
3
4
2
7
6
1
8
14
Advertisement
Table of Contents
