Entering a Phone Name
You can choose a name for your phone. This name is shown in
other devices when your phone is discovered.
To enter your phone name:
1. From standby mode, press
scroll to Connect (
2. Highlight Bluetooth and press
3. Highlight Phone Name and press
4. Highlight Edit and press
5. Enter or edit the name and press
To restore the original phone name you entered:
1. From standby mode, press
scroll to Connect (
2. Highlight Bluetooth and press
3. Highlight Phone Name and press
4. Highlight Reset and press
5. Press
Yes
Turning Bluetooth On/Off
After pairing with a Bluetooth (BT) device, you can initiate a
Bluetooth session with a Bluetooth device. To initiate, the mode
on the phone and device must be set to On or Automatic.
Session - An active connection between the phone and
device, such as a call using a Bluetooth headset. Ending the
call ends the session.
Mode - Enables a session. There are three modes:
Automatic - The BT function is turned on automatically
when you answer or make a call via BT handsfree or
when you start sending information, such as a business
card. The mode changes to On once you pair with a
Bluetooth device, but you can reset it to Automatic.
Automatic mode improves battery consumption. In
Automatic mode, you can accept a Bluetooth session, but
you cannot initiate a Bluetooth session.
) and press
Select
) and press
(left softkey) to confirm the reset.
Section 2: Understanding Your PCS Phone
Menu
(right softkey), then
Select
Select
(left softkey).
Select
(left softkey).
OK
(left softkey).
Menu
(right softkey), then
Select
Select
(left softkey).
Select
Select
(left softkey).
2I: Using Bluetooth™ 114
(left softkey).
(left softkey).
(left softkey).
(left softkey).