Engine Starting - VOGE SR1 Operation Manual

Engine starting

The side stand is picked up.
Check if the remote key is in the range of 1.2m to antenna.
Turn the ignition switch to position "
When all the conditions above achieved, the left or right
hand need to hold brake lever tightly to keep safety, the right hand can press the electrical starting button "
grip.
Start the engine to let engine keep idling until fully pre-heated.
This model is designed with prevention for wrong ignition, the engine could be started under conditions below only:
-The ignition switch is at the position ON of "
Enough pre-heating makes better lubrication, to decrease engine abrasion, the colder the weather the more
pre-heating minutes are needed. Long time idling working of engine is not allowed, because the poor heat radiation
lead to engine overheated and damage the inner parts.
Under cold conditions, suitably turn the throttle grip while pressing the starting button to easier start.
The lubrication works only when the engine is running, so don't push the motorcycle forward for a long way when the
engine is stopping. After the engine started, check the flashing or abnormal power on of indicating lights on
instrument, in case it is, please top the engine and make corresponding inspection.
31
29
The emission gas of motorcycle includes CO, which is a gas without
color, smell but poisonous.
Idly run the engine in room without ventilation or poor ventilation
" .
is not allowed to avoid get poisoned.
", pick up the side stand and tightly hold the brake lever to keep safety.
!
Warning
!
Danger
"without turning throttle