The Brake Pads - VOGE SR1 Operation Manual

The brake pads

The abrasion of brake pad passed the min. thickness limit may lead to poor braking performance, under some cases,
it may lead to brake system damage. For the reliability for braking, the abrasion passed Min. thickness limit is not allowed.
Replacement for brake pad
The correct replacement needs to remove
the wheels, so this work shall be done by
VOGE dealer.
No matter the front or rear brake pads,
replace them in pairs as a set, in case
only replace one piece of them, it may
make imbalance brake even accident.
After the brake pads removed, don't
operate the brake lever, otherwise
the brake piston may return hardly,
meanwhile making leakage of brake
liquid.
The oil or other dirt touches brake pad and
plate when replacing is not allowed, in
case if there is, please clean it up,
otherwise it may make poor braking
performance.
Limit for front pad:
When replaced for new pads, please repeatedly confirm the brake
lever, confirm the pads tightly press the brake plate, meanwhile
confirm the free travel of brake lever.
Limit for rear pad:
!
Danger
58