Operation; Ignition Switch - VOGE SR1 Operation Manual

Ⅴ.Operation

Ignition switch

They ignition switch on this model is at the right side of panel of front luggage case, the ignition
switch and steering lock are in one piece.
There 2 pieces of key for this model, There is a mechanical key included in each remote key,
please keep them in place.
The ignition, steering, seat and fuel tank's lock share a same remote-control key.
The mechanical key can open the seat lock, whose hole is at the bottom of seat.
Press the ignition switch, the outer light belt of ignition switch gets on, then turn the ignition
switch clockwise to position "
begins its initialization.
Pick up the side stand, tightly hold the brake lever (The front one only or both the front and rear
together), then press the starting button on the right switch assy., the engine normally starts.
Turn the ignition switch to position "
then press the key "
The logic for locking the motorcycle is the same position of "
up, the ignition switch could be turned to position "
When the ignition switch turned to position "
later, in case the remote key is within the range of 1.2m to antenna, please make outer light
belt of ignition switch gets on for 4 seconds, (The most circulation numbers are 4), when the
outer light belt gets off while the buzzer shortly ringing, the ignition lock gets off, the
motorcycle gets into the working condition of automatic anti-theft. In case in this process the
remote key is out of the range of 1.2m to antenna, when the light belt gets off while buzzer
shortly ringing, the ignition lock gets off, the motorcycle gets in the working condition of
automatic anti-theft.
", the motorcycle gets power on, meanwhile the instrument
", the seat lock and fuel tank cap could be opened,
" to open the fuel tank switch; Press key "
", the outer light belt keeps on, after 3 seconds
" to open the seat lock.
", after the motorcycle locked
".
14