Led+Negative Display - VOGE SR1 Operation Manual

LED+Negative display

Speed: The running speed of motorcycle. (km/h-kilometers
/hour or mph-mile/hour).
Rotation speed: Rotation speed of engine (1000r/min,
1000 rounds / each minute)
Water temperature: WHen the temperature is ≥120 ˚C,
the alarm light for coolant temperature gets on.
Fuel level: Show you the current residual fuel.
When the residual fuel in tank is ≤1.6, the last cell gets flashing,
which reminds you fill up with fuel as soon as possible.
Get into the page of setup
Clear the single
mileage to "0"
Setup for clock
The fuel in the tank is waving in the running, when there is a few fuel, the indicating light may be not on, which is
normal, don't worry.
Operate instrument during driving is dangerous, the hand leaves handle bar may reduce your control on
motorcycle.
When the liquid screen shows under TRIP, long press SEL, the single mileage clear to 0.
Long press the key ADJ, the time of liquid screen shows partly jump, then shortly press key
SEL, adjust the current time.
!
Caution
!
Danger
20