Brake Liquid - VOGE SR1 Operation Manual

Brake liquid

The brake liquid is an important part in hydraulic system for power transmission, so it need be reliable under high, low
temperature or flowing performance at low temperature and good in anti-corrosive, so please adopt the correct one.
Check the brake liquid
·Too low the liquid level in brake oil cup may let air get into brake system to reduce the braking performance. So please
periodically check the liquid level.
· Check and fill up the brake liquid shall conduct at the front and rear oil cup.
· The liquid level shall not be higher than mark (MAX),when it lower than mark(MIN),please fill up immediately.
· The brake liquid is corrosive, which is bad for the surface of plastic or paint.
In case the filling-up of brake liquid is needed, open the cap of oil cup by
yourself may let air and moisture in, which largely reduce the braking
performance even failure, so please contact VOGE dealer to do this
work.
The specification of brake liquid
·When there is impurity or moisture in the brake liquid, please filter or replace,
otherwise it may reduce the pressure for braking and make bad braking
performance, especially in wet weather or place.
·The brake liquid works more than 2 years, it may get bad due to the long work,
please replace immediately.
The specification for brake liquid is: DOT3 or DOT4,Please dispose the replaced
old liquid in environment friendly way.
53
!
Warning
!
Caution
Mixture of brake liquid among different
brand and specification is not allowed
due to the different formula of different
brake liquid may let the braking
performance fall down.