Adjustment For Headlight Dimmer - VOGE SR1 Operation Manual

Adjustment for headlight dimmer

·All the height of headlight must be correct under any
loading of shock absorber.
·To keep safe night driving, adjust the light angle of
headlight to suit different loadings.
–The adjusting screw is at the lower rear of headlight,
please align the adjusting screw of figure by cross
screwdriver.
-The low beam shall be turned clockwise, the light gets
low, opposite is high.
-The high beam shall be turned clockwise, the light gets
high, opposite is low.
!
Danger
In case you don't know much about the height of light,
please contact the VOGE dealer.
37
The adjusting figure for light
Insert the cross screwdriver along the arrow, clamp the
gear combination surface and then start turning.
Enlarged view for a part