Coolant - VOGE SR1 Operation Manual

Coolant

Check and maintenance for coolant
The coolant can radiate the heat for hot parts in engine and keep its normal working
temperature.
·The check and filling-up of coolant are all done in sub tank.
·Stop the engine
·Check when the engine is cold, because the coolant may expand when it got hot.
·Keep the motorcycle upright.
·Check the coolant level through expansion tank, whose level shall be between the
scale line LOWER and UPPER.
·In case the coolant level is under scale mark LOWER, fill up from the port of
expansion tank.
·In case the coolant level is higher than scale mark UPPER, the coolant may
overflow from tube when it got hot and expand in working, for avoid hurting by
hot coolant, fill up too much is not allowed.
·In case the motorcycle need fill up the coolant frequently, which means there
is malfunction in the cooling system, under this case, please contact the VOGE dealer.
When the expansion tank is totally dried up, don't fill up coolant by yourself, because under this case, the air
may already get into the cooling system and need to be exhausted, so please contact the VOGE dealer for
maintenance.
!
Warning
Expansion tank
Expansion tank
50