Engine Starting - VOGE DS900X Operation Manual

Engine starting

The side stand ls laid down.
Press button of ignition switch.
Confirm if the engine is in neutral, the indicator light " N " for neutral gear on meter may get on.
Once conditions above got ready, tightly clasp clutch lever by left hand for ensure safety, the right hand press electric
starting button " ", under this case, you needn't turn the accelerator grip.
When engine started, release electric starting button immediately.
Start engine, to let it pre-heat sufficiently.
The design for this model is with interlocking switch for ignition circuit and starting circuit, also with kill switch on side
stand. The engine could be started under conditions only as below shows:
The engine is in neutral gear " N ", and the ignition switch and kill switch are at position "
The engine is not in neutral gear, and the ignition switch and kill switch are at position "
tightly clasp clutch lever.
Enough pre-heating makes better lubrication, to decrease engine abrasion, the colder the weather th e more pre-
heating minutes are needed. Long time idling working of engine is not allowed, because the poor heat radiation lead
to engine overheated and damage the inner parts.
Under cold conditions, suitably turn the throttle grip while pressing the starting button to easier start.
The lubrication works only when the engine is running, so don't push the motorcycle forward for a long way when the
engine is stopping. After the engine started, check the flashing or abnormal power on of indicating lights on
instrument, in case it is, please top the engine and make corresponding inspection.
49
!
Caution
!
Warning
".
", pick up side stand, and