The Engine Starting - VOGE SR4 Max LX350T-5A Book

The engine starting

The side stand is picked up.
The kill switch is at "
The engine speed is less than 1000rpm.
All the conditions above reached, the left/right
hand tightly hold the brake lever to make sure
safe, the right hand press the electrical starting
button " "， then slightly turn thethrottle grip.
When the engine started, release the electrical
button immediately.
Start the engine and keep idling to fully pre-heat.
Enough pre-heating makes better lubrication, to decrease engine abrasion, the colder the
weather the more pre-heating minutes are needed. Long time idling working of engine is not
allowed, because the poor heat radiation lead to engine overheated and damage the inner
parts.
Under cold conditions, suitably turn the throttle grip while pressing the starting button to
easier start.
The lubrication works only when the engine is running, so don't push the motorcycle for ward
for a long way when the engine is stopping. After the engine started, check the flashing or
abnormal power on of indicating lights on instrument, in case it is, please top the engine and
make corresponding inspection.
38
".
The emission gas of motorcycle includes CO,
which is a gas without color, smell but poisonous.
Idly run the engine in room without ventilation or
poor ventilation is not allowed to avoid get
poisone.
!
Warning
!
Danger