Replacement For Oil Filter's Element - VOGE SR1 Operation Manual

Replacement for oil strainer
When each Maintenance period was reached, please replace the
oil strainer for engine.
Replace the oil strainer when the oil in engine was drained off.
Support the motorcycle by side stand.
Remove the screw plug on the bottom of crankcase and drain off
the oil in engine.
Lay a piece of oil absorption paper or a cotton cloth under the valve
cover of engine, to avoid the overflow oil gets engine
surface dirty when the cover was removed.
Remove the valve cover on the left side of engine.
Remove the oil strainer itself and drain off the oil.
Replace the for a new one.
(Note: The pressing spring is necessary, in case there is damage on o-ring, please
replace it for a new one, then fasten the bolt for the cover with fastening torque
of (20~25)N.m, then fasten the oil drainage plug: Middle place of botton (25~30) N.m,
left side of tail part (18~22) N.m
Check the gasket on valve cover element, replace for a new one if it is necessary. A wrong oil strainer may
damage the engine, please surely adopt the origin VOGE parts.
49
!
Warning
valve cover
oil strainer