VOGE SR1 Operation Manual page 56

·In case the air temperature is lower than the one marked up on the label, please adopt the coolant fits for lower temperature.
·The VOGE coolant is with ice point of -40℃ with ethylene glycol but without silicate, so we suggest purchase or replace by
Made in VOGE.
To keep the coolant performance, replace each two years.
Coolant specification: VOGE coolant is with ice point of -40℃
with ethylene glycol but without silicate
The filling-up volume: 460ml.
Dispose the replaced old coolant in environment friendly way.
The SR1 engine adopts the mechanical water sealing which usually on auto or motorcycle as picture 1 shows, who
are made up by dynamic ring, static ring, spring and seal ring with overflow hole as picture 2 shows, the static ring tightly
stick to dynamic ring under the force of spring, which produce pressure on surface for a long term and then the reliable
moving seal occurs, when the water pump is working, the dynamic and static ring are relatively sliding, which could not be
completely sealed, so there may a little leakage of water drop gets out from overflow hole, this situation is normal , which
is not harmful to normal driving and not any damage on motorcycle.
Picture 1
!
Caution
.
Mechanical
sealing
Overflow
hole
Water pump
When filling up the coolant, in case open the tank's
cap of heat radiator after engine started, please let
the engine cool down first, otherwise the hot coolant
may inject out and make you hurt when you opening
the cap of heat radiator.
Pictur2
Mechanical sealing
!
Danger
Seal ring
Dynamic ring
Static ring
Spring
52