Step 4: Create An Installation Map - enphase IQ7 Installation And Operation Manual

Step 4: Create an installation map

The Enphase installation map is a diagram of the physical location of each microinverter in your PV
installation. Copy or use the blank map to record microinverter placement for the system or provide
your own layout if you require a larger or more intricate installation map.
Each Enphase microinverter, IQ Gateway, and Battery has a removable serial number label. Build the
installation map by peeling the serial number labels from the microinverter mounting plates and
placing the labels on the map. You will also place the IQ Gateway and IQ Battery serial number on the
map after installation.
After you have created the installation map, use the Enphase Installer App to record serial numbers
and configure the system.
For details, refer to "Detect the Microinverters" in the help topics of the Enphase Installer App.
A. Peel the removable serial number label from each microinverter and affix it to the
respective location on the paper installation map.
B. Peel the label from the IQ Gateway and any Enphase battery, if installed) and affix it to the
installation map.
C. Always keep a copy of the installation map for your records.
19
IQ7/IQ7+/IQ7X/IQ7A Microinverters Installation and Operation Manual
© 2023 Enphase Energy Inc. All rights reserved.
Affix serial number labels
September 2023
IOM-00028-1.0