enphase IQ7 Installation And Operation Manual page 34

Topic
Cooling
Relative humidity range
Approved for wet locations
Pollution degree
Standard warranty term
Compliance
Grounding
Monitoring
Communication
Integrated DC disconnect/
Integrated AC disconnect
34
IQ7/IQ7+/IQ7X/IQ7A Microinverters Installation and Operation Manual
Enphase IQ7-60-2-US Microinverter parameters
Natural convection - no fans
4% to 100% condensing
Yes
PD3
enphase.com/warranty
CA Rule 21 (UL 1741-SA) UL 62109-1, UL1741/IEEE1547, FCC
Part 15 Class B, ICES-0003 Class B, CAN/CSA-C22.2 NO.
107.1-01
This product is UL Listed as PV Rapid Shut Down Equipment
and conforms with NEC-2014 and NEC-2017 section 690.12
and C22.1-2015 Rule 64-218 Rapid Shutdown of PV Systems
for AC and DC conductors when installed according to
manufacturer's instructions.
The DC circuit meets the requirements for ungrounded PV
arrays in NEC. Ground fault protection (GFP) is integrated
into the class II double-insulated microinverter.
Enphase Installer Portal monitoring options require an
Enphase IQ Gateway.
Power line communication (PLC)
The DC and AC connectors have been evaluated and
approved for use as the load-break disconnect required by
NEC 690.
© 2023 Enphase Energy Inc. All rights reserved.
Unit Min Typical Max
September 2023
IOM-00028-1.0