Horizontal mount
Vertical mount
Step 4: Create an installation map
The Enphase installation map is a diagram of the physical location of each microinverter in your PV array. Copy or use
the
blank map
to record microinverter placement for the system, or provide your layout if you require a larger or more
intricate installation map.
Each Enphase microinverter, IQ Gateway, and IQ Battery has a removable serial number label. Build the installation map
by peeling the serial number labels from the microinverter mounting plates and placing the labels on the map. After
installation, you should place the IQ Gateway and IQ Battery serial numbers on the map.
After creating the installation map, use the Enphase Installer App to record serial numbers and configure the system.
For details, refer to "Detect the microinverters" in the help topics of the Enphase Installer App.
A.
Peel the removable serial number label from each microinverter and affix it to the respective location on the
paper installation map.
B.
Peel the label from the IQ Gateway and any IQ Battery (if installed) and affix it to the installation map.
C. Always keep a copy of the installation map for your records.
17
IQ8MC, IQ8AC, IQ8HC, and IQ8X Microinverters Installation and Operation Manual
> 38 mm
© 2023 Enphase Energy Inc. All rights reserved.
November 2023
USM-00008-2.0