Step 4: Create An Installation Map - enphase IQ8 Series Installation And Operation Manual

B. Torque the microinverter fasteners e.g., T bolt as follows. Do not over-torque.
•
6 mm mounting hardware: 5 N m
•
8 mm mounting hardware: 9 N m
• When using mounting hardware from a third-party manufacturers, use the manufacturer's
recommended torque value.
Horizontal mount
Vertical mount

Step 4: Create an installation map

The Enphase installation map is a diagram of the physical location of each microinverter in your PV array.
Copy or use the blank map on page 32 to record microinverter placement for the system or provide your own
layout if you require a larger or more intricate installation map.
16
>38 mm
© 2023 Enphase Energy Inc. All rights reserved.
IQ8AC/IQ8HC Installation and Operation Manual
June 2023
USM-00005-2.0