Step 4: Create An Installation Map - enphase IQ7 Installation And Operation Manual

Step 4: Create an installation map

The Enphase installation map is a diagram of the physical location of each microinverter in your PV
installation. Copy or use the blank
for the system or provide your layout if you require a larger or more intricate installation map.
Each Enphase microinverter, IQ
installation map by peeling the serial number labels from the microinverter mounting plates and placing the
labels on the map. You will also place the IQ
installation.
After you have created the installation map, use the Enphase Installer App to record serial numbers and
configure the system.
For Enphase Installer App details refer to "Detect the Microinverters" in the help topics of the Enphase
Installer App.
A. Peel the removable serial number label from each microinverter and affix it to the respective location
on the paper installation map.
B. Peel the label from the IQ Gateway and any Enphase Battery, if installed, and affix it to the installation
map.
C. Always keep a copy of the installation map for your records.
17
IQ7+/IQ7X/IQ7A Microinverters Installation and Operation Manual
Enphase installation map
, and battery have a movable serial number label. Build the
Gateway
and IQ Battery serial numbers on the map after
Gateway
© 2023 Enphase Energy Inc. All rights reserved.
in this manual to record microinverter placement
August 2023
USM-00003-1.0