Step 4: Create An Installation Map - enphase IQ8P Installation And Operation Manual

Vertical mount

Step 4: Create an installation map

The Enphase installation map is a diagram of the physical location of each microinverter in your PV
array. Copy or use the Enphase installation map
provide your layout if you require a larger or more intricate installation map.
Each Enphase microinverter, IQ Gateway, and IQ Battery have a removable serial number label. Build
the installation map by peeling the serial number labels from the microinverter mounting plates and
placing the labels on the map. You should also place the
IQ Gateway and IQ Battery serial numbers are on the map
after installation.
After you have created the installation map, use the
Enphase Installer App to record serial numbers and
configure the system.
For details, refer to "Detect the Microinverters" in the help
topics of the Enphase Installer App.
A. Peel the removable serial number label from each
microinverter and affix it to the respective location
on the paper installation map.
B. Peel the label from the IQ Gateway and any IQ Battery, (if installed) and affix it to the
installation map.
C. Always keep a copy of the installation map for your records.
17
IQ8P Microinverter Installation and Operation Manual
to record microinverter placement for the system or
© 2023 Enphase Energy Inc. All rights reserved.
>300 mm
Affix serial number labels
September 2023
IOM-00001-1.0