Step 4: Create An Installation Map - enphase IQ8AC Installation And Operation Manual

•
When using mounting hardware from a third-party manufacturer, use the manufacturer's
recommended torque value.
Horizontal mount
Vertical mount

Step 4: Create an installation map

The Enphase installation map is a diagram of the physical location of each microinverter in your PV array.
Copy or use the blank map
placement for the system or provide your own layout if
you require a larger or more intricate installation map.
Each Enphase microinverter, IQ Gateway, and IQ
Battery have a removable serial number label. Build the
installation map by peeling the serial number labels
from the microinverter mounting plates and placing the
labels on the map. You should also place the IQ
Gateway and IQ Battery serial numbers on the map
after installation.
After you have created the installation map, use the
Enphase Installer App to record serial numbers and
configure the system.
15
IQ8MC/IQ8AC/IQ8HC Installation and Operation Manual
>38 mm
to record microinverter
© 2023 Enphase Energy Inc. All rights reserved.
Affix serial number labels
September 2023
IOM-00029-1.0