Step 4: Create An Installation Map - enphase IQ8MC Installation And Operation Manual

Microinverters

Hide thumbs Also See for IQ8MC:

Table of Contents

> 38 mm

Vertical mount

Step 4: Create an installation map

The Enphase installation map is a diagram of the physical location of each microinverter in your PV array. Copy or use

the blank map on page 38 to record microinverter placement for the system, or provide your own layout if you require

a larger or more detailed installation map.

Each Enphase microinverter, IQ Gateway, and IQ Battery has a removable serial number label. Build the installation

map by peeling the serial number labels from the microinverter mounting plates and affixing the labels on the map. You

should also affix the IQ Gateway and IQ Battery serial numbers on the map after installation.

After you have created the installation map, use the Enphase Installer App to record serial numbers and configure the

system.

For details, refer to "Detect the microinverters" in the help topics of the Enphase Installer App.

Peel the removable serial number label from each microinverter and affix it to the respective location on the

paper installation map.

Peel the label from the IQ Gateway and any IQ Battery (if installed) and affix it to the installation map.

C. Always keep a copy of the installation map for your records.

IQ8MC/IQ8AC/IQ8HC Microinverters Installation and Operation Manual

October 2023

USM-00008-1.0

Table of Contents

Iq8ac Iq8hc