RDM Values
Parameter
Manufacturer ID
Model ID
DMX Start Address
Output Frequency
Clean and Maintain the Fixture
Clean the Fixture
CAUTION:
other than oil-free canned air.
• Use oil-free canned air to clean the
LED emitters prior to installation and
prior to storage.
• Use oil-free canned air to clean the
fan and fin stack as part of regular
fixture maintenance.
Store the Retrofit
• When not installed on a fixture, store the
Source 4WRD Color II in its original packaging
or in a dust-resistant plastic bag.
• Store the Source 4WRD Color II at
temperatures of 5°C (41°F) or higher.
• If you must store the Source 4WRD Color II
below 5°C (41°F), make sure it is in an upright
position as shown. Allow it to warm to room
temperature for a minimum of one hour before
applying power.
20
RDM PID
0x6574
0x0803
0x00F0
0x8123
Do not touch or clean LED emitters with anything
Source 4WRD Color II Installation and User Manual
Value
Electronic Theatre Controls
ETC Source 4WRD Color II
Range = 1–507
0 = Standard (1.2 kHz)
1 = High (20 kHz)
LEDs facing up
Fan and
fin stack
Store with