Table of Contents
Advertisement
Introduction
The Source 4WRD Color II is a replacement for a standard Source Four
burner assembly. It converts the HPL source to an RGBA (red, green, blue,
and amber) LED and provides a significant reduction in power consumption.
The Source 4WRD Color II uses DMX dimming and requires power from a
non-dimmable source. When not using DMX, you can use any of the
12 presets or 5 sequences on the Source 4WRD Color II.
The Source 4WRD Color II can also be used with the Source 4WRD PAR or
PARNel Fixture Body to create a Source 4WRD Color II PAR or PARNel
fixture. For best results, we recommend that you use the included diffusion
on the Source 4WRD PAR or PARNel Fixture Body when paired with the
Source 4WRD Color. For more information, see the Source 4WRD Color II
PAR and PARNel datasheet at etcconnect.com.
Note:
Source Four LED, Fresnel, PAR, PARNel, or jr fixtures.
Source 4WRD Color II Installation and User Manual
The Source 4WRD Color II retrofit kit is not compatible with
Retrofit kit,
shown installed
on a Source Four
fixture body
1
Advertisement
Table of Contents
