Error Codes; Rdm Values - ETC ColorSource Spot Installation Manual

ETC Installation Manual

Error codes

There are three error codes that may be shown on the user interface.

•
with the color calibration. The fixture will need to be returned to the ETC
factory; contact your local dealer to set up a repair.

•
has gone into over-temperature protection mode to avoid damaging
the fixture. Once the fixture has self-cooled, the error will automatically
clear.

•
upgraded fixtures have a software issue. Reload software to clear the
error. If the error persists, contact ETC.

RDM values

Parameter
Manufacturer ID
Model ID
Personality ID
ColorSource Spot
: Screen toggles between
: Screen toggles between
: Screen toggles between
Value
0x6574
0x0205
0x0206
1
2
3
4
Page 9 of 12
ColorSource Spot
 
and to indicate a problem
 
and to indicate that the fixture
 
and
Description
Electronic Theatre Controls
ETC ColorSource Spot
ETC ColorSource Spot Deep Blue
5 Channel
Direct
1 Channel
RGB
Electronic Theatre Controls, Inc.
to indicate that the