Error Codes; Rdm Values - ETC ColorSource PAR Installation Manual

ETC Installation Guide
ColorSource PAR v1.5

Error codes

There are three error codes that may be shown on the user interface.

•
with the color calibration. The fixture will need to be returned to the
ETC factory; contact your local dealer to set up a repair.

•
fixture has gone into over-temperature protection mode to avoid
damaging the fixture. Once the fixture has self-cooled, the error will
automatically clear.

•
upgraded fixtures have a software issue. Reload software to clear the
error. If the error persists, contact ETC.

RDM values

Parameter
Manufacturer ID
Model ID
Personality ID
ColorSource PAR v1.5
: Screen toggles between
: Screen toggles between
: Screen toggles between
Value
0x6574
0x0201
0x0202
1
2
3
4
Page 10 of 12
 
and to indicate a problem
 
and to indicate that the
 
and
Description
Electronic Theatre Controls
ETC ColorSource PAR
ETC ColorSource PAR Deep Blue
5 Channel
Direct
1 Channel
RGB
to indicate that the
ETC