Enable Extended Printhead Logging - Canon Colorado 1630 Operation Manual

Enable extended printhead logging

Introduction
When your local Service representative requests it, you can enable extended printhead logging.
When you enable this setting, the server stores additional information about the printheads. This
setting will automatically be disabled after 30 days.
Procedure
1. Open the settings editor.
2. Click on [Support]→[Troubleshooting].
3. Click on the value next to [Extended printhead logging]. A window opens.
4. Select [Enabled] and click on [Ok].
Enable extended printhead logging
Chapter 9 - Troubleshooting and support 331