Clean The Maintenance Station, Wiper And Clean Wall - Canon Colorado 1630 Operation Manual

Clean the maintenance station, wiper and clean wall

Clean the maintenance station, wiper and clean wall
Introduction
The maintenance station plays an important role to keep the printheads optimally cleaned. In the
maintenance station you have to clean the wiper and the clean wall.
Video: Clean the maintenance station
Before you begin
Use Colorado 1630 prescribed:
• Microflex gloves for handling ink
• Lint free cloths and swabs
• Cleaning liquid (Cleaner MB - Methyl benzoate)
NOTE
For information on the prescribed maintenance materials, see
maintenance materials on page
CAUTION
• Wear the prescribed gloves when contact with ink or maintenance materials is possible.
Gloves should always overlap sleeves. Follow the Safety Data Sheets (SDS) guidelines
carefully in order to ensure maximum safety.
IMPORTANT
Use the prescribed cleaning liquid. Do not use any other cleaners.
Procedure
1. Start the maintenance action via the operator panel. For more information, see
maintenance on page
2. Put on the Colorado 1630 approved gloves.
3. Open the top cover from the media input side.
4. Locate the maintenance station with the wiper and the clean wall on the right hand side.
178 Chapter 6 - Maintain the system
255.
174.
List of Colorado 1630
Start manual