Media Touches - Canon Colorado 1630 Operation Manual

Media touches

Media touches
Introduction
Prevent media touches from happening. When the media touches the printhead or printhead
carriage, the print gets pollutes or smudged. Follow the procedure below. You can stop at any
time in the procedure when the problem is solved.
Media touches
Procedure
1. Check if the media type you loaded is also the media type you selected on the operator panel.
Make sure the two are correct.
2. Check if the [Media thickness ] setting in the RIP is correct. The media thickness determines the
carriage height. This value represents the total thickness of the media, e.g. for self-adhesive vinyl,
PVC including the liner. For more information, see
354 Chapter 9 - Troubleshooting and support
Change the media settings on page
67.