Replace A Drive Gear On A Media Shaft - Canon Colorado 1630 Operation Manual

Replace a drive gear on a media shaft

Introduction
You can replace a drive gear on a media shaft without service assistance.
Replace a drive gear on a media shaft
Video:
For inside winding, you need the new take-up media shaft. The gear inside the new take-up
media shaft is marked with the number 2.
When to do
When the teeth of a drive gear are damaged, you can replace one or both drive gears of your
media shaft. The procedure below can be used either on the feed media shaft or the take-up
media shaft.
When the metal shaft itself is damaged, you have to replace the complete media shaft. You can
request a new part from your local representative.
Replace a drive gear on a media shaft
.
Chapter 9 - Troubleshooting and support 337