Canon Colorado 1630 Operation Manual page 233

3. Lift the cover a little up and towards you (1), then lift it up fully and take it out (2).
4. Vacuum the condenser surface as indicated. Make sure you remove all the collected dust.
Do not remove any parts of the chiller.
CAUTION
Vacuum the surface with care, make sure you do not damage the condenser surface.
5. Place the cover back into position.
IMPORTANT
Keep the area next to the chiller free. Do not store any items there, as it can result in
insufficient cooling and damage to the machine.
6. Fasten the left and right screws on top of the cover.
7. When you vacuumed the chiller as part of periodic maintenance, on the operator panel tap on
[Completed] to end the maintenance action.
Vacuum the chiller and check the fluid level (first design)
Chapter 6 - Maintain the system 233