Maintain The Printer; Refill Ink - Canon Colorado 1630 Operation Manual

Maintain the printer

Maintain the printer

Refill ink

Introduction
You can refill ink easily without the risk of spilling ink.
On the operator panel tap on the [Inks] icon on the right. You see an overview of the ink bottles
and levels of remaining ink:
• Read the messages above the ink bottles to understand the status of the ink level and the ink
bottles. The message indicates when ink is running out or is of the wrong color, bottles are not
present, wrong, invalid or expired.
• When the operator panel gives an orange warning, a bottle is not present, invalid, wrong or
expired, or it is advised to refill ink for a specific color as the ink is running out.
• When ink is about to expire within 28 days or is expired, the operator panel gives a red
warning and the operator is asked to confirm to continue printing. This will appear every day
until the ink status is not expired or almost expired.
The ink dialog contains instructions to make clear that printhead warranty is voided if expired
ink is used.
• When the operator panel gives a red warning for another reason, you must refill ink for a
specific color. The printing process is stopped until you have refilled the ink.
• For more detailed information on the status, tap the blue information icon at the top right hand
corner.
• When one of the LED lights located next to the bottles is on (not blinking), you can refill ink for
the related color.
• The order of the bottles from left to right is YCMK.
• When you see ink pollution, immediately clean the affected area. For more information, see
Clean the ink unit on page
196 Chapter 6 - Maintain the system
251.