Start periodic maintenance
Start periodic maintenance
Introduction
Start periodic maintenance when the operator panel gives a warning.
Periodic maintenance contains a variety of mandatory maintenance actions and the possibility to
print a nozzle classification chart to optimize the nozzles.
IMPORTANT
You must perform all periodic maintenance actions when indicated, otherwise the printer
functions are not guaranteed.
Procedure
1. On the operator panel tap on the [Tools] icon on the right.
2. Tap on [Periodic maintenance].
3. When you want to print nozzle classification charts to optimize the nozzles:
1. Make sure [Advanced automatic nozzle optimization] is selected.
2. Select a roll to print the nozzle classification charts on.
176
Chapter 6 - Maintain the system