Wrinkles - Canon Colorado 1630 Operation Manual

Wrinkles

Introduction
Gradient banding within swath for glossy print modes. Only for high coverage mixed colors.
Solve wrinkles on your print. Wrinkles show as rough repeating patterns especially in black.
Follow the procedure below. You can stop at any time in the procedure when the problem is
solved.
Wrinkles
Procedure
1. Increase the smart ink limit value to +1 in print mode settings (in the RIP)
page 75.
2. Adjust the profile: reduce ink limit in color profile (mainly black) (media verification profile).
3. Select a slower print mode.
After you finish
When the problem is not solved, contact your application specialist or local Service
representative.
Select a print mode on
Chapter 9 - Troubleshooting and support
Wrinkles
349