Table of Contents
Advertisement
Clean the Automatic Maintenance System (AMS)
Introduction
Clean the Automatic Maintenance System station daily.
Equipment
• Gloves (for example: Ansell Microflex 93-260)
• Cloth-Poly Wipe 10cm x 10cm (lint-free)
• Isopropyl alcohol - IPA (>= 98%)
IMPORTANT
Do NOT use flush liquid for daily printhead maintenance. It may contribute to increased ink/flush
pollution levels on the printheads and the underside of the carriage.
Procedure
1. Remove the cover plate by inserting an object such as the handle end of a swab into the small
hole, then slide it in the direction of the arrow on the cover, then lift it off.
1x
2. Select the Maintenance Tab.
3. Select Clean AMS icon.
4. Dip the foam end of a swab in isopropyl alcohol.
Clean the Automatic Maintenance System (AMS)
Chapter 9 - Printer Maintenance
185
Advertisement
Table of Contents
Troubleshooting
